Multicam cnc5/26/2023 ![]() ![]() The biggest problem that I'm having using the VcarvePro on the Multicam is that it returns to the home position after each tool change. I typically use Vcarve Pro for smaller runs or for parts that I need absolute control over and the EnRoute for larger parts and production runs. Both are great machines but I have noticed that the vectric software writes different code than the EnRoute software that my boss bought with the Multicam. 2000) (which is my back up machine/ former production machine). 2014/US) and has a 12 tool ATC, 36' pendular bed (meaning that I have essentially 2 tables with one spindle-think volume production) and my other table is an AXYZ 7012 (ca. ![]() I have to be very careful on the days when I am programming for both tables to make sure that I am outputting for the correct PP. Huez, I actually have BOTH types of machines that I use here in our shop. Is there something i'm missing in aspire or is there a line of code i can change in the post processor file to correct this? It's kinda doing my head in! If i use another PP "Multicam G Code (inch)" the program will run correctly but it never actually cuts the material, the Z lifts up higher then the material and basically does an air cut. When i load the file into the supplied toolpaths software to send the file to the machine everything loads correctly and the program runs, BUT, if i set the multipass to to do 2 passes at say 6mm and then 12mm it will actually cut through to 12mm first and then move up and run the path at 6mm. In aspire i've been using the post processor "AXYZ A2MC (mm)". ![]() I've been using vectric aspire for awhile on my own cnc but i'm having issues getting multipass to work correctly on the multicam. My work recently purchased a second hand multicam router to cut out basic panels. First post here and i'm just after a little help. ![]()
0 Comments
Leave a Reply. |